Shera
Showing 25–36 of 66 results
-
Brand: SheraCasting Ring Liner
Asbestos free. Extra thick and soft therefore it absorbs expansion well. Ceramic fibre which is resistant to very high temperatures. Contact with water or steam does not influence its physical or thermal characteristics.
~ 50 x 1mm
~ Box 25 metres -
Brand: SheraImpression spray and surface tension release agent
~ For alginate, polyether and silicone impressions
~ Improves the flow properties of stones and investments
~ Releases surface tension of waxes
~ Facilitates bubble free models without any residues
~ Very good wetting properties
~ Formaldehyde and solvent free
~ Especially effective and economical in use -
Brand: SheraSHERASON 928
~ removes stone and plaster residues from dentures or spatulas
~ can be diluted 1:2 with water
~ appropriate for ultrasonic bath
-
Brand: SheraSandblasting Material
~ 99.7% aluminium oxide
~ Colour: White
~ For precious metal or ceramic
~ Carton contains 4 x 5kg bagSHERA abrasives are of the highest quality and degree of purity possible. The hygroscopic abrasives are packed in 5kg bags for protection against moisture.
-
Brand: Shera
Sandblasting Material
~ 99.7% aluminium oxide
~ Colour: White
~ For precious metal or ceramicSHERA abrasives are of the highest quality and degree of purity possible. The hygroscopic abrasives are packed in 5kg bags for protection against moisture.
-
Brand: SheraSilicone putty
~ Shore hardness A 95
~ For the preparation of over bites as well as bite registrations and for models for denture repairs
~ Slightly oily
~ Very exact moulding
~ Dimensional stability
~ Stable to boiling -
Brand: SheraSuper hard stone, superior quality:
~ For implant work, sectioned and master model
~ Good thixotrope quality and very good flow characteristic
~ Can be scanned with several systems
~ Ideal for plastic basing systems
~ Extreme easy processingTechnical specification
mixing ratio (powder : distilled water) 100 : 20 hardness after 2 h (MPa; N/mm2) 300 hardness after 24 h (MPa; N/mm2) 320 compressive strength after 1 h (MPa; N/mm2) 70 compressive strength after 1 h (psi) 10,150 setting expansion after 2 h (%) < 0.10 working time (min) 5.0 – 6.0 end of setting (min) approx. 30 -
Brand: SheraRapid set super hard type 4 stone for creative technicians:
~ Short demould time of 10 minutes
~ Can be used for various applications
~ For urgent denture repairs and relines
~ Low expansionTechnical specification
special feature demouldable after 10 minutes mixing ratio (P : d W) 100 : 25 setting expansion after 2 hours 0.14 processing time (min) ca. 2.5 compressive strength after 1 h (MPa; N/mm²) 50 hardness after 24 h (MPa; N/mm²) 220 hardness after 2 h (MPa; N/mm²) 200 -
Brand: Shera~ 22 x 0.2 mm
~ For all alloys
~ Glass-fibre reinforced
~ Good price to performance ratio
~ 50 Pack~ Max speed ↻ 50,000 RPM
-
Brand: Shera
Sandblasting Material
~ 99.7% aluminium oxide
~ Colour: White
~ For precious or non-precious-metal
~ Carton contains 4 x 5kg bagSHERA abrasives are of the highest quality and degree of purity possible. The hygroscopic abrasives are packed in 5kg bags for protection against moisture.
-
Brand: Shera
Sandblasting Material
~ 99.7% aluminium oxide
~ Colour: White
~ For precious or non-precious-metalSHERA abrasives are of the highest quality and degree of purity possible. The hygroscopic abrasives are packed in 5kg bags for protection against moisture.
